价格 | |
所属行业 | 阀 |
厂家/商户所在地 | 广东-广州 |
公司名 | 广州阀门有限公司 |
主营产品 | 进口电磁阀,进口调节阀,进口疏水阀,进口止回阀 |
联系我时,请说是百贸网上看到的!
进入厂家网站
应用范围:
它**应用于船舶重工、测试设备、加热设备、液压设备等,工作温度在
产品特点:
阀芯均为不锈活塞式,活塞环用特殊耐温、**材料制作;活塞与金属阀腔不产生直接摩擦,阀体安装方向无限制;**线圈,并采用散热的结构方式,因此不易烧毁;长时间停止动作重新启动,动作同样灵敏;启动压力0.2MPa。
主要技术参数:
产品规格: |
DN0.5~DN200 |
阀体材质: |
不锈钢 |
适用介质: |
油、蒸汽、腐蚀流体等 |
温度范围: |
+300~+ |
防护性能: |
防潮、防爆(Exd IICT5)、防腐 |
接线方式: |
接线座式;引线式;插头式 |
控制方式: |
常开、常闭 |
电源电压: |
DC24~127V; AC36~380V |
连接方式: |
内螺纹、法兰(外螺纹和特殊接口可定做或加转接头) |
工作原理:
常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上卸压,活塞靠下腔介质压力推动,电磁阀打开;当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,阀关闭。
常开:当线圈通电时,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。
规格尺寸:
产品代码 |
GN815 |
公称通径 |
选用《ZCD系列直动式电磁阀》、《ZC系列中低压电磁阀》中的标准口径 |
适用压力 |
选用《ZCD系列直动式电磁阀》、《ZC系列中低压电磁阀》中的压力范围 |
连接尺寸 |
选用《ZCD系列直动式电磁阀》、《ZC系列中低压电磁阀》中的接口尺寸(或定制) |
阀体体质 |
不锈钢、304或316 |
特殊功能 |
(其它功能可定制) |
注:出口端压力大于进口端压力,介质会反向导通。可安装止回阀或订制自带止回功能的阀。
Appli**ions:
It is widely used in shipbuilding He**y Industry, test equipment, heating equipment, hydraulic equipment, the wo**ng temperature above
Features:
Are stainless steel piston va**e, piston ring with a special temperature, wear-resistant material; piston va**e chamber with the metal does not h**e a direct friction, the va**e mounting direction unlimited; special coil structure and way of using heat, it is not easy bur**; long time to restart the s**ped action, action as sensitive; minimum starting pressure 0.2MPa.
Main technical parameters:
Specifi**ions: |
DN0.5~DN200 |
Body material: |
Stainless Steel |
Medium: |
Oil, steam, corrosive fluids |
Temperature range: |
+300 ~ + |
Protection performance: |
Moisture-proof, explosion-proof (Exd IICT5), anti-corrosion |
Wiring: |
Terminal Block Type; lead type; male |
Co**ol: |
Normally open, normally closed |
Power supply voltage: |
DC24 ~ 127V; AC36 ~ 380V |
Connection: |
Thread, flange (male and special interfaces or add custom adapter) |
How it works:
NC: When the coil is energized, the pilot spool pull the pilot hole to open, pressure relief va**e, piston push media pressure on the lower chamber, the electromagnetic va**e is ope**; When the coil power, the pilot va**e by the spring return, pilot hole Close the va**e on the throttle chamber pressurized by the piston return spring and thrust, the va**e closed.
Normally Open: When the coil is energized, the pilot hole closed, the va**e chamber and pressurized by the piston return spring throttle thrust, the electromagnetic va**e is closed. When the coil power, the pilot va**e by the spring return, pilot hole open, pressure relief va**e on the chamber, medium pressure piston push the lower chamber, the electromagnetic va**e is ope**.
Size:
Product Code |
DM815 |
DN |
Use "ZCD Series direct-acting solenoid va**e", "ZC series of low pressure solenoid va**e" in the standard diameter |
Apply pressure |
Use "ZCD Series direct-acting solenoid va**e", "ZC series of low pressure solenoid va**e" in the pressure range |
Connection size |
Use "ZCD Series direct-acting solenoid va**e", "ZC series of low pressure solenoid va**e" in the interface dimensions (or customized) |
Body Constitution |
Stainless steel, 304 or 316 |
Special Features |
(Other functions can be customized) |
Note: The outlet pressure is greater than the inlet pressure, the media will pass anti-wizard. Can be installed or custom built non-return