价格 | |
所属行业 | 阀 |
厂家/商户所在地 | 广东-广州 |
公司名 | 广州阀门有限公司 |
主营产品 | 进口电磁阀,进口调节阀,进口疏水阀,进口止回阀 |
联系我时,请说是百贸网上看到的!
进入厂家网站
应用范围:
**应用在航天、船舶重工、**化工、给排水、消防设备、食品**设备、清洗设备、景观喷灌、加湿设备、液压设备、测试设备、水厂等,工作压力在6.4---100MPa的管道系统中。
产品特点:
阀芯均为不锈钢活塞式,活塞环不会被介质中的杂质卡死,动密封性能高,寿命长;活塞与金属阀腔不产生直接摩擦,阀体安装向无限制;**线圈,不易烧毁;长时间停止动作重新启动,动作同样灵敏;启动工作压力0.5MPa。
主要技术参数:
产品规格: |
DN0.5~DN200 |
阀体材质: |
不锈钢 |
适用介质: |
水、气、油、蒸汽、**、腐蚀流体等 |
温度范围: |
-100~+ |
介质粘度: |
小于 |
防护性能: |
防水、防爆(Exd IICT5)、防腐 |
接线方式: |
接线座式;引线式;插头式 |
控制方式: |
常开、常闭 |
电源电压: |
DC12~127V; AC36~380V |
连接方式: |
内螺纹、法兰(外螺纹和特殊接口可定做或加转接头) |
泄 漏 量: |
零 |
工作原理:
常闭:当线圈通电时,先导阀芯吸合,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开;当线圈断电时,先导阀芯靠弹簧复位,先导孔关闭,阀腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。
常开:当线圈通电时,先导孔关闭,阀上腔由活塞节流孔增压和复位弹簧的推力,电磁阀关闭。当线圈断电时,先导阀芯靠弹簧复位,先导孔打开,阀上腔卸压,活塞靠下腔介质压力推动,电磁阀打开。
规格尺寸:
产品代码 |
HM809 | ||||
公称通径 |
DN3 |
DN4 |
DN5 |
DN6 |
DN8 |
适用压力 |
0.5~50MPa | ||||
接口螺纹 |
G1/4 |
G3/8 | |||
阀体材质 |
不锈钢、304、316等 | ||||
特殊功能 |
普通型(其它功能可订制) |
注:出口端压力大于进口端压力,介质会反向导通。可安装止回阀或订制自带止回功能的阀。
Appli**ions:
Widely used in aerospace, shipbuilding He**y Industry, petrochemical, water, fire fighting equipment, food and medical equipment, cleaning equipment, landscape irrigation, humidifi**ion equipment, hydraulic equipment, testing equipment, water plant, the work pressure in the pipeline 6.4 --- 100MPa system.
Features:
Spool is stainless steel piston and piston rings will not be stuck impurities in the medium, dynamic sealing performance and long life; piston va**e chamber with the metal does not produce direct friction, the va**e installed to the limit; authoritarian coil, easily bur** ; for a long time to restart the s**ped action, action as sensitive; minimum start wo**ng pressure 0.5MPa.
Main technical parameters:
Specifi**ions: |
DN0.5 ~ DN200 |
Body material: |
Stainless Steel |
Medium: |
Water, gas, oil, steam, gas, corrosive fluids |
Temperature range: |
-100 ~ + |
Media Viscosity: |
Less than |
Protection performance: |
Waterproof, explosion-proof (Exd IICT5), anti-corrosion |
Wiring: |
Terminal Block Type; lead type; male |
Co**ol: |
Normally open, normally closed |
Power supply voltage: |
DC12 ~ 127V; AC36 ~ 380V |
Connection: |
Thread, flange (male and special interfaces or add custom adapter) |
Leakage: |
Zero |
How it works:
NC: When the coil is energized, the pilot spool pull the pilot hole to open, pressure relief va**e on the chamber, the piston on the lower chamber medium pressure to promote, the electromagnetic va**e is ope**; When the coil power, the pilot va**e by the spring return, pilot hole closed throttle va**e chamber pressurized by the piston return spring and thrust, the electromagnetic va**e is closed.
Normally Open: When the coil is energized, the pilot hole closed, the va**e chamber and pressurized by the piston return spring throttle thrust, the electromagnetic va**e is closed. When the coil power, the pilot va**e by the spring return, pilot hole open, pressure relief va**e on the chamber, the piston on the lower chamber medium pressure to promote the solenoid va**e open.
Size:
Product Code |
DM809 | ||||
DN |
DN3 |
DN4 |
DN5 |
DN6 |
DN8 |
Apply pressure |
0.5~50MPa | ||||
Interface Thread |
G1/4 |
G3/8 | |||
Body material |
304 stainless steel (316), etc. | ||||
Special Features |
Can be customized with a manual, with a return function) |
Note: The outlet pressure is greater than the inlet pressure, the media will pass anti-wizard. Can be installed or custom built non-return va**e function of the va**e.