[免费发布]
| 价格 | |
| 所属行业 | |
| 厂家/商户所在地 | 辽宁-大连 |
| 公司名 | 大连中通石化耐腐蚀泵厂 |
| 主营产品 | 耐酸泵,耐腐蚀泵,油泵,水泵 |
联系我时，请说是百贸网上看到的！
进入厂家网站
Type ZTS
ZTS**化工流程泵，是根据API610第七版和VDMA24297(轻/中型)规范进行设计。
应用范围
本泵适合输送清洁或含有颗粒的液体，低温或高温的液体，中性或有腐蚀性的液体。
主要用于：
■ 炼油厂、**化学工业、煤加工工业和低温工程
■ 化学工业、造纸、纸浆业、制糖业和普通流程工业
■ 供水厂、海水淡化厂
■ 供暖和空气调节系统
■ 发电厂
■ 环境保护工程
■ 船舶及海上工业等
性能参数
口 径 DN 25-200mm
流 量 Q 可达2400m3/h
扬 程 H 可达300m
工作压力 P 可达2.5MPa
工作温度 T 可达 -80℃ ～ +450℃
结构特点
该泵为单级、卧式、径向剖分式蜗壳泵。泵体为脚支撑，单吸径向叶轮，轴向吸入，径向排出。根据使用条件，采用前、后口环及平衡孔进行水力平衡。填料箱体有冷却或加热管接头。轴封采用填料密封，也可采用单端面或双端面机械密封，并配有冷却、冲洗或密封液系统。
标准管路按API规范设计。
吸入及排出管法兰的额定压力等级相同。
从电机端看，泵为顺时针转动。
输送介质
■ 各种温度和浓度的**、**、**和**酸等无机酸和有机酸。
■ 各种温度和浓度的**和**等碱性溶液。
■ 各种盐溶液。
■ 各种液态**化工产品，有机化合物以及其它有腐蚀性的原料和产品。
目前我厂的耐腐蚀材料，能满足上述各种介质的要求。订货时，请用户提供所需要输送介质的详细情况。
ZTS petrochemical process pump is desig** according to API610 7th edition and VDMA24297 (light/medium) standard.
Appli**ion ranges
The pump are suitable for pumping clean or containing particle liquid, low or high temperature liquid, chemically neutral or corrosive liquids.
■ Oil refinery, petrochemical industry, coal processing industry and low temperature engineering.
■ Chemical industry, papermaking, paper pulp industry, sugar industry and general processing industry.
■ Water supply factory and desalinator.
■ Heating and air conditioning system.
■ Power plant.
■ Environmental engineering.
■ Ships and offshore industry, etc.
Performance parameter
■ Size DN 25
■ Capacity up to
■ Heads up to
■ Operating pressures up to 2.5MPa
■ Operating temperatures
Construction feature
The pumps are horizontal single-stage single-suction ce**ifugal process pumps with supporting feet below. The single-suction radial impeller, shaft direction suction port and radially upward discharge port. According to the operating conditions, the hydraulic balance provide to the front or rear wear rings and blance holes. Stuffing-box h**e the cooling or heating connections. The shaft sealing is packing or mechanical seal(single or double faces), the cooling, flushing or sealing liquid are provided.
Standard piping are desig** according to API standard.
The rated pressure stage of flanges is same in the suction and discharge piping.
Looking from the motor, the direction of rotation is clockwise.
Pumping medium
■ All kinds of temperature and conce**ation of sulfuric acid, nitric acid, hydrochloric acid and phosphoric acid and other inorganic acid and organic acids.
■ All kinds of temperature and conce**ation of sodium hydro**de alkaline solution and sodium carbonate, etc.
■ Various salt solution
■ Various liquid petroleum products, organic **pounds, and other corrosive materials and products.
At present, anti-corrosive materials for pumps provided by our plant can meet all the requirements of the medium mentio** above. Please provide the detail serv** conditions for the pump to us when you order.