美国GATES笔式皮带张力计

您知道正确的皮带张力计可延长皮带寿命20%-50%吗?

快速,简便,的皮带张一3检测工具-笔式皮带张力计

适用于各种V型皮带,正时皮带的张力检测!

HOW TO USE？

1. CAUTION:Before doing maintenance or tensioning on belt drives,turn equipment off and lock outthepowersource**e guards on **hinery when running.

Place amatchedsetof belts over the she**e grooves.Take up the slack untilthebeltsappear fairly taut.

2. With the drive s**ped,measure the belt span lenth of yourdrive(seesketch).Set the rubber O-ring on the body of the tensiong**eat thedimension equal to 1/64 inch ×32,1/2 inch.

3. Set the O-ring on the plunger at 0 against the body ofthetensiong**e.

4. With the tension g**e perpendicular to the span,apply a forcetoabelt in the center of the span**flect the belt until bottomofthelarge O-ring is even with the ** of the next belt,or thebottomofa straight edge laid across the ** of

other belt(s)onthedrive.Release pressure and read pounds of force used atO-ringonplunger.

Note:When new belts are installed on a drive,the tension willdroprapidlyduring the first few hours.Thus,for new belts,tightentothe initialinstallation defection force shown in thetablesbelow.Check tensionfrequently during the first 24 hoursofoperation.Subseque**etensioning should fall between theminimumand ma**mum forces shownin the tables.

5. **pare the force required in step 4 with the ranges inthetablesbelow.

Tightenorloosenbelts to bring them into the re**me** range.

Note:The proper tension for V-belt drive is the lowest tensionatwhichthe belts won’t slip under peak load condition ，深圳美国盖茨GATES笔式皮带张力计7401-0076 ， 宁波美国盖茨GATES笔式皮带张力计7401-0076  上海美国盖茨GATES笔式皮带张力计7401-0076